Object Marker Signs: MUTCD-Compliant Hazard Markers for Roadside Obstructions

Object Marker Signs: MUTCD-Compliant Hazard Markers for Roadside Obstructions

Type 1, 2, 3, and 4 object markers that alert drivers to obstructions in and along the roadway, and to the end of a road

Object marker signs identify fixed obstructions, narrow bridges, culverts, and other roadside hazards that drivers need to see well before they arrive, as well as the end of a roadway. Trafficsigns.com stocks MUTCD object markers in high intensity and diamond grade reflective sheeting, so you can match the marker to the hazard and the traffic speed on your road.

Object Marker Signs: Common Buyer Questions

What is an object marker?
An object marker is a small, highly reflective sign used to mark an obstruction in or next to the roadway, such as a bridge pier, guardrail end, narrow culvert, or median island, or to mark the end of a road. Unlike regulatory or warning signs, object markers don't carry words. Instead, they use yellow reflectors, solid yellow panels, black and yellow stripes, or, for the end of a road, red reflectors or a red panel.
What does an object marker sign mean?
It depends on the type. Type 1 and Type 2 markers use yellow reflectors or a solid yellow panel to show there's an obstruction in or next to the road. Type 3 markers use black and yellow diagonal stripes that slope down toward the side drivers should pass on; the center version uses chevrons, meaning traffic can pass on either side. Type 4 markers are red and tell drivers the road ends.
What is a type 3 object marker?
Under the MUTCD, a Type 3 object marker is a 12" x 36" panel with alternating black and retroreflective yellow stripes, at least 3 inches wide, sloping down at 45 degrees toward the side of the obstruction where traffic should pass. Left (OM3-L) and right (OM3-R) versions show drivers which side to pass on, and the center version (OM3-C) uses chevrons when traffic can pass on either side. They're used on obstructions in or next to the roadway, and the MUTCD recommends the Type 3 look for the approach ends of guardrails and crash cushions. Trafficsigns.com carries left, right, and center Type 3 markers, including the Object Marker Left Type 3 Red & White and Object Marker Right Type 3 Red & White; note that the MUTCD's Type 3 design uses black and yellow stripes.
What are the requirements for object markers in the MUTCD?
The Manual on Uniform Traffic Control Devices (MUTCD) sets the design of each object marker type and where it may be used. Obstructions within the roadway get a Type 1 or Type 3 marker, plus pavement markings on the approach. Obstructions next to the roadway get a Type 2 or Type 3 marker, and the end of a road gets a Type 4 marker. For obstructions in the road or within 8 feet of the shoulder or curb, the bottom of the marker should be at least 4 feet above the edge of the travel lane. Markers must be retroreflective so they stay visible at night.
What materials are object marker signs made from, and how long do they last outdoors?
Our object markers are fabricated from .080 aluminum with reflective sheeting bonded to the face. Because Types 1 through 3 are yellow, they need high intensity or diamond grade sheeting; the MUTCD doesn't allow engineer grade on yellow. Diamond grade delivers the longest reflective range for high-speed roadways. Both grades are built for continuous outdoor exposure and resist fading, cracking, and corrosion.
What sizes are object markers?
Under the MUTCD, Type 1 markers are diamonds at least 18" on a side, Type 2 markers are at least 6" x 12" in a vertical or horizontal orientation, Type 3 markers are 12" x 36", and Type 4 end-of-road markers are diamonds at least 18" on a side. These standard designs keep markers recognizable to drivers regardless of which state or municipality installs them.
How quickly do object marker orders ship, and can I order in bulk for a road department?
Object markers are stocked items and typically ship faster than custom sign orders. Volume pricing is available on several styles, including the Type 2 Object Marker (OM2-1H), which drops in price per unit as order quantity increases, a helpful option for departments outfitting multiple locations at once.

What Are Object Marker Signs?

Object marker signs are a category of MUTCD-regulated traffic devices designed to flag fixed obstructions that sit in or beside the roadway, and to mark the end of a road. Rather than giving drivers an instruction like a regulatory sign, an object marker simply says: something is here. Striped Type 3 markers also show which side to pass on. They are used at bridge piers, guardrail terminals, narrow underpasses, raised medians, culvert headwalls, and other roadside hazards that could catch a driver off guard, especially at night or in poor weather.
Because these markers are often the only warning a driver gets before reaching a fixed object, reflectivity and correct placement matter as much as the sign itself. Trafficsigns.com produces object markers in high intensity and diamond grade sheeting, giving municipalities and contractors the flexibility to match reflective performance to the posted speed limit and lighting conditions on each road.

Type 1, Type 2, Type 3, and Type 4 Object Markers Explained

The MUTCD defines four types of object markers, each with its own design and job. None of them have a border.
Type 1 object markers are diamonds at least 18 inches on a side. They're either yellow or black with nine yellow reflectors (OM1-1 and OM1-2), or a solid yellow reflective panel (OM1-3). They mark obstructions within the roadway, such as a pier or the end of a raised median. Trafficsigns.com carries Type 1 Object Markers (OM1-1), along with the OM1-2 and OM1-3 versions.
Type 2 object markers are smaller rectangles, at least 6 x 12 inches, used on obstructions next to the roadway, such as narrow bridge rails. They have three yellow reflectors on a white panel (OM2-1V and OM2-1H) or a solid yellow reflective panel (OM2-2V and OM2-2H), mounted vertically or horizontally, including the Type 2 Object Marker OM2-1H for horizontal mounting and the OM2-1V for vertical applications.
Type 3 object markers are 12 x 36 inch panels with black and yellow diagonal stripes that slope down toward the side drivers should pass on. Left (OM3-L) and right (OM3-R) versions direct traffic to one side, and the center version (OM3-C) uses chevrons when traffic can pass on either side. They can mark obstructions in or next to the roadway, and the MUTCD recommends the Type 3 look, applied directly without a backing panel, for the approach ends of guardrails and crash cushions. Trafficsigns.com offers left, right, and center configurations, including the Type 3 Object Marker OM3-L.
Type 4 object markers are red diamonds, at least 18 inches on a side, with nine red reflectors or a solid red reflective panel. They mark the end of a roadway, and the MUTCD doesn't allow Type 1 or Type 4 markers on obstructions next to the road.
For obstructions in the road or within 8 feet of the shoulder or curb, the bottom of the marker should be at least 4 feet above the edge of the travel lane. Obstructions within the roadway also need pavement markings on the approach.

Where Object Markers Fit Alongside Other Roadside Warning Signs

Object markers rarely work alone. Agencies typically pair them with broader warning signage and lighting to build a complete visibility system for a hazard. In flood-prone areas, for example, a ROAD MAY FLOOD (W8-18) warning sign is often installed ahead of a low-water crossing, alongside object markers on the culvert headwalls themselves. On rural roads with limited overhead lighting, the MUTCD allows a flashing yellow Warning Beacon to supplement an object marker on an obstruction, catching a driver's eye long before headlights would reveal the reflective sheeting alone. In temporary work zones, a solar LED warning light can serve a similar purpose.
This layered approach reflects how the MUTCD expects traffic warning markers to function: as one part of a driver's total field of information, not a standalone fix. When you're specifying signage for a hazard, it helps to think through the full approach a driver takes toward that obstruction and place markers, warning signs, and lighting at the points where each will do the most good.

Object Marker Types at a Glance

Use this comparison to match the correct object marker type to your roadside hazard, stripe pattern, and mounting location.
Marker TypeDesignTypical Use CaseStandard SizeStarting Price
Type 1
Yellow or black diamond with nine yellow reflectors, or all-yellow
Obstructions within the roadway (piers, barrier ends)
18" x 18" minimum
$34.15
Type 2
Three yellow reflectors on white, or all-yellow
Obstructions adjacent to the roadway (narrow bridge rails)
6" x 12" minimum, vertical or horizontal
$14.95
Type 3
Black and yellow diagonal stripes sloping toward the side traffic passes (chevrons for the center version)
Obstructions in or next to the roadway; also the look used on guardrail and crash cushion ends
12" x 36"
$33.25
Type 4
Red diamond with nine red reflectors, or all-red
End of a roadway
18" x 18" minimum
Contact for pricing

Shop Object Marker Signs

Object markers are available in high intensity or diamond grade sheeting. The MUTCD sets the design for each type: yellow reflectors or panels for Types 1 and 2, black and yellow stripes for Type 3, and red for Type 4 end-of-road markers.
Object Marker Center Type 3 Red and White sign Posts & Hardware

Object Marker Center Type 3 Red and White - OM3-C R/W

Note: the MUTCD Type 3 design is black and yellow

$33.25 - $58.25

Shop on Trafficsigns.com
Object Marker Left Type 3 Red and White sign Posts & Hardware

Object Marker Left Type 3 Red & White - OM3-L R/W

Note: the MUTCD Type 3 design is black and yellow

$33.25 - $58.25

Shop on Trafficsigns.com
Type 1 Object Marker OM1-1 sign Posts & Hardware

Type 1 Object Markers | OM1-1

$34.15 - $47.15

Shop on Trafficsigns.com
Type 2 Object Marker OM2-1H sign Posts & Hardware

Type 2 Object Markers | OM2-1H

$14.95 - $20.95

Shop on Trafficsigns.com
Type 2 Object Marker OM2-1V sign Posts & Hardware

Type 2 Object Markers | OM2-1V

$14.95 - $20.95

Shop on Trafficsigns.com

Outfit Your Roadway with MUTCD-Compliant Object Markers

From Type 1 diamonds and Type 2 panels to striped Type 3 markers and Type 4 end-of-road markers, Trafficsigns.com stocks the object markers, warning signs, and hardware you need to flag roadside hazards correctly the first time. Choose high intensity or diamond grade sheeting to match your road's speed and lighting.
Shop Object Markers